Gut angekommen. Die ersten Eindrücke waren lauwarm, wie das Brett tattig aussieht, aber es war nur ungewaschener Fluss. Es gibt eine praktische Pfeil ti unterstützen Sie in immer die ESP01s in der richtigen Weise herum eingesteckt, und seien Sie vorsichtig, es ist sehr leicht, falsch zu bekommen. Um es als Programer für die Arduino IDE zu verwenden, müssen Sie nur einen einfachen Umschalter zwischen IO0 und GND hinzufügen, um es in den Flash-Modus zu bringen. Ganz einfach.

Arrived safe and sound. First impressions were luke warm as the board look tatty, but it was just unwashed flux. There is a handy arrow ti assist you in getting the ESP01s plugged in the right way around, and be careful it is very easy to get wrong. To use it as a programer for the Arduino IDE, all you need to do is add a simple switch between IO0 and GND to get it in to flash mode. Simple.

Gut angekommen. Die ersten Eindrücke waren lauwarm, wie das Brett tattig aussieht, aber es war nur ungewaschener Fluss. Es gibt eine praktische Pfeil ti unterstützen Sie in immer die ESP01s in der richtigen Weise herum eingesteckt, und seien Sie vorsichtig, es ist sehr leicht, falsch zu bekommen. Um es als Programer für die Arduino IDE zu verwenden, müssen Sie nur einen einfachen Umschalter zwischen IO0 und GND hinzufügen, um es in den Flash-Modus zu bringen. Ganz einfach.

I plan to use this adapter for ESP 8266 - 01. It looks OK, but there are missing any instructions. I have found driver on internet, so the driver in my PC is OK. Adapter itself could be OK, there is 5V to 3.3V conversion, but I was not able to upload software to ESP 01 board. Missing switch GPIO0 to GND (for software upload). My ESP01 module was not S type, so maybe this was a problem.

I plan to use this adapter for ESP 8266 - 01. It looks OK, but there are missing any instructions. I have found driver on internet, so the driver in my PC is OK. Adapter itself could be OK, there is 5V to 3.3V conversion, but I was not able to upload software to ESP 01 board. Missing switch GPIO0 to GND (for software upload). My ESP01 module was not S type, so maybe this was a problem.

I plan to use this adapter for ESP 8266 - 01. It looks OK, but there are missing any instructions. I have found driver on internet, so the driver in my PC is OK. Adapter itself could be OK, there is 5V to 3.3V conversion, but I was not able to upload software to ESP 01 board. Missing switch GPIO0 to GND (for software upload). My ESP01 module was not S type, so maybe this was a problem.